How to draw a fire evacuation plan
For the basis of the graphic partplan aevacuation take the floorplan building. Consider that if the floor area is more than 1000 square meters, then it is necessary to split its sections and draw a separate scheme for each of them. If floorplan there is only in paper form, then scan it and use a bitmap image as a basis for decorationplan aevacuation electronic.
Go around all the rooms located on the floor, inspect them. Tick onplan e the location of phones, fire extinguishers, automatic fire alarm, fire hydrants, main, spare and emergency exits. For each room specify the number of people in it and the estimated average number of visitors if they are to be at presence in the room.
Inspect and verify all major, emergency and emergency exits for their size and reliability. Note the presence of anti-smoke agents and the possibility of ventilation.
Draw outplan premises in any graphic program. Consider the estimated size of the paper copy. For floors and sectionsplan ovevacuation it must be at least 600x400 mm so that it is well read and reproducedat visually. Localplanevacuation from a separate room can be 400x300 mm.
Consider options for ways out of each room taking into account the flow of people, sizes of the communication paths. Keep in mind, and those threads that can be formed on upper floors. Check with a solid green arrows recommended basic ways of an exit from the floor for each room. Sidings evacuation draw the dotted green arrows.
In the diagram apply conventional signs the location of telephones, fire hydrants, fire extinguishing means and systems of fire automatics. Enter places of the main, spare and emergency exits. Be sure to select a location plan e, which corresponds to the placement of this scheme. Your drawing should not have any unnecessary, cluttering parts, inscriptions, signs. The list of symbols must beat is under the graphic part.